Main Performance
best wholesale price pipe beveling machine China
German technology imported motor
Auto feed pipe facing machine was designed for the endbeveling of
narrow working site and small diameter pipe. ODmounted on the pipe,
one clamping block just fit one sizepipe, secured clamping automatic
feeding, easy to operate. ltwas widely used in water wall, fins, boiler
thesingle pipe and exhaust pipe facing and beveling.
Specification:
|
Mode |
Machining Outer Diameter |
Thickness |
Clamping System |
Accessory Cushion Block |
|
IS0-63C |
28-63 mm |
≤12 |
Bi-directional clamping |
28.32.38.42.45.51.54.57.60.63 |
|
IS0-76C |
42-76 mm |
42.45.51.54.57.60.63.68.76 |
||
|
IS0-89C |
63-89 mm |
63.68.76.83.89 |
Key Features
1. Compact OD-Mounted Design
•Attaches directly to the pipe's outer diameter, eliminating the need for bulky fixtures.
•Single clamping block per pipe size ensures a tailored fit and secure grip.
2. Versatile Applications
•Designed for single-pipe and exhaust pipe facing/beveling.
•Beveling Machine Ideal for water walls, boiler economizers, superheaters, reheaters, and finned tubes in power plants.
3. Precision Engineering
•Adjustable clamping system accommodates slight variations in pipe alignment.
•High-speed cutting tools maintain accuracy even in tight spaces.
Details and features
high working efficiency
Simultaneous cutting and chamfering of pipelins completed in one go, effectively improving processing efficency
Imported motors from
Germany
Better and more stable performancee quipped with overload protection
Two types of
speed regulation
Gear speed regulation and electronic infinite speed regulation
wellnit on-site application case
customizable external clamping pipe end beveler
Applications
•Power Plants: Beveling boiler tubes, economizers, and superheaters.
•HVAC Systems: Preparing refrigerant and condensate lines.
•Industrial Boilers: Machining finned tubes and exhaust systems.
•Marine Engineering: Compact beveling for seawater piping.
Beveller machine Advantages
Space Efficiency: OD-mounted design ideal for narrow workspaces.
Automation: Beveling Machine Auto-feed reduces labor and ensures consistent quality.
Cost-Effective: Minimal setup time and reduced material waste.
User-Friendly: Intuitive controls for operators of all skill levels.
OD-Mounted Auto-feedPipe beveller machine Safety & Maintenance
•Ensure pipes are securely clamped to prevent slippage.
•Maintenance Tips:
•Lubricate moving parts monthly.
•Inspect cutting tools for wear and replace promptly.
•Clean debris after each use to avoid corrosion.
Common Problems and Quick Fixes
External clamp pipe beveling machines are essential tools for pipeline construction and maintenance. They clamp onto the outside of pipes to perform beveling operations. Below are the most common problems operators encounter and their practical solutions.
1. Machine Won't Start
Possible Causes
Power supply issues – poor contact or unstable voltage
Carbon brushes excessively worn
Motor overload protection has tripped
For pneumatic machines: air supply pressure too low or air filter clogged
Quick Fixes
Check and stabilize power supply connections
Replace worn carbon brushes
Press overload reset button, wait for motor to cool
Ensure air pressure meets specification (typically 6–7 bar / 90–100 psi); check and clean air filter
2. The Pipe/Tube is Slipping
Possible Causes
Clamping pressure insufficient
Pipe surface has scale or foreign material
Wrong clamping jaws selected for pipe diameter
Weld seams or deformations preventing full contact
Quick Fixes
Tighten clamping bolts/locking lever
Clean pipe surface before clamping
Select correct jaw blocks for pipe size
Check and ensure pipe is centered with the cutter head
3. Tool Bit Chatters
Possible Causes
Tool bit loose or overextended
Tool holder too loose in slides
Cutting speed too fast
Clamping pads loose on pipe
Cutting fluid required
Main bearing pre-load loose
Quick Fixes
Tighten tool bit and ensure proper extension
Adjust tool holder to eliminate play
Reduce cutting speed
Re-tighten clamping pads
Apply adequate cutting fluid
Check and adjust bearing pre-load
4 The Tool Holder is Not Feeding
Possible Causes
Feed pin broken or out of position
Feed sprocket shear pin broken
Feed screw or feed nut stripped
Slide rails too tight
For split-type machines: feeder device not adjusted properly
Quick Fixes
Check and replace broken feed pin or shear pin
Replace stripped feed screw or nut
Adjust slide rail tightness
Manually rotate carriage and confirm feeder wheel engages properly without binding
5. Strong Machine Vibration or Noisy Operation
Possible Causes
Tool worn or improperly installed
Broken gear or damaged bearing
Machine not properly clamped or centered
Excessive feed rate or bevel width
Worn transmission components
Quick Fixes
Replace worn or damaged tool
Inspect rotating system and replace broken gear or bearing
Reinstall machine, ensure tight clamping and correct centering
Reduce feed rate, reduce bevel width per pass
Add lubricant to rotating parts and check for component wear
6. Clamping Failure
Possible Causes
Clamping screws or tightening bolts not locked properly
Clamping surface excessively deformed or worn
Split-type machine upper/lower halves not fully locked into V-shaped groove
Quick Fixes
Check and tighten all clamping screws
Inspect clamping jaws – replace if deformed or excessively worn
Ensure split-type upper and lower halves are fully locked into V-shaped groove without gaps
Key Takeaways
Niche Expertise: Tailored for small-diameter pipes in confined areas.
Automation Advantage: Streamlines beveling with auto-feed and clamping.
Durability: Built for continuous operation in demanding environments.
OD-Mounted Auto-feedPipe beveller machine The OD-Mounted Auto-Feed Pipe Beveling Machine is a precision tool for industries requiring efficient, reliable beveling in tight spaces. Its compact design and automation features make it indispensable for modern pipeline prefabrication and maintenance workflows.
Core strengths
Choose the plan that suits you best.
Self-constructed closed loop of industrial integration
Realise the closed loop of design,production and supply chain to ensure the lifeline of quality.
Powerful Brand Influence
Leading beveling machinery brand, with productssold in over
26 Years Of Deep Technology Accumulation
Mastering the core technology of 'groovemachinery manufacturing' and leading the industryin the field of groove manufacturing.
Integrated Bevel Cutting MachinerySystem
Integrate the resources of strategic partners tocreate industr
Advantage
Exhibition site
The chairman personally visited the site
Exhibition site
Foreign Trade and Technical Team
Exhibition site
Foreign Trade Elite
Exhibition site
TechnicalDirector
Company Team
Smooth automation process
Company warehouse
Equipped with various components
Company workshop
Component Manufacturing Workshop
Company workshop
Component Manufacturing Workshop
Our Service
Create a comprehensive solution for efficient human theft manag
01
Pre-sale service
Conduct product consultation,product promotion and marketing activities,and technical support for customer needs.
02
Installation service
Before the actual installation,we will communicate with the customer to understand the installation needs and requirements,and develop the insta..
03
After-sales service
Installation and commissioning of specific products;Respond to consumer questions,answer consumer inquiries,and deal with consumer comments.
Our Partners
Zhejiang Wellnit Machinery Manufacturing Co., Ltd. has earned global acclaim through its sterling reputation, exceptional quality and comprehensive after-sales service, standing out
brilliantly among numerous domestic and international enterprises!
Certifications
Export licence
Export licence
Export licence
Patent Certificate
Patent Certificate
Patent Certificate
FAQ
01.What is an external clamp beveling machine used for?
02.What types of bevels is the external clamping beveling machine suitable for?
V-groove: The most common groove type, suitable for various materials like carbon steel and stainless steel.
U-groove: Often used for welding thick-walled pipes, it reduces filler metal and lowers welding stress.
J-groove: Common for pipelines made of special alloys or stainless steel where high welding quality is required.
Double V (X) groove: Suitable for extra-thick pipes, it can effectively reduce welding deformation.
Composite groove: Combines different shapes as needed to meet special welding requirements.
03.Is the external-clamp fully automatic beveling machine suitable for large-diameter pipes or small-diameter ones?
04.What materials are used in an external clamp beveling machine?
05.How are these products packaged for export?
06.How long is your warranty?
Hot Tags: iso-63c external clamp pipe beveling machine, China iso-63c external clamp pipe beveling machine manufacturers, suppliers, factory, automatic pipe beveling machine, tube beveling machine, electric pipe beveler, beveller machine
