Operation process of beveling machine

The operation process of beveling machine generally includes the following steps:
1. Prepare the workpiece: According to the beveling processing requirements, select the appropriate metal material, clean the workpiece, and remove the surface oxide layer, oil and other impurities.
2. Set parameters: According to the thickness, material and beveling requirements of the workpiece, set the processing parameters of the beveling machine, including tool type, cutting speed, feed speed, beveling angle, etc.
3. Install the tool: Select the appropriate tool according to the processing requirements, and fix it on the tool system of the beveling machine to ensure that the tool is firmly installed.
4. Processing: Start the beveling machine, slowly feed the workpiece into the tool working area, observe the cutting situation during the processing, and ensure that the bevel and angle meet the requirements.
5. Quality inspection: After the processing is completed, the size, angle, surface quality, etc. of the beveling need to be checked to ensure that it meets the technical standards and design requirements.
6. Cleaning and maintenance: After the processing is completed, clean the beveling machine, regularly check the wear of the tool, and maintain the equipment to ensure its normal operation.