Precautions For Pipe Cutting Machine

1. The spindle speed must be changed after parking. The gears must be fully meshed when changing speed. If the machine tool is found to be abnormal, stop and check immediately.
2. Adjust the tool and clamp the workpiece before cutting. The length of the clamping part shall not be less than 50 mm. The parking baffle shall be fixed, and work can be carried out only after the clamping, loosening, forward and backward test runs.
3. When the machine tool is rotating, no part of the human body shall touch the transmission parts. When operating, tie the cuffs and do not wear gloves. The human head should deviate from the cutting direction.
4. When changing the tool, measuring the workpiece, lubricating, and cleaning the pipe head, the machine must be stopped.
5. When cutting the pipe head, prevent the pipe head from flying out and injuring people.
6. When putting the long material pipe into the material rack and loosening the binding wire, measures should be taken to prevent the pipe from rolling, impacting, and crushing people.
7. When using a grinding wheel pipe cutting machine, you should check in advance whether the grinding wheel is damaged, cracked, or damp, and whether the power cord is reliable.
8. The dust removal device of the pipe cutting machine should be intact before cutting.
9. No one should stand in the direction of the workpiece in and out.