Working Principle Of Pipe Cutting Machine

The principle is that through the cooperation of computer and hydraulic, the electrical system controls the oil circuit movement direction of the hydraulic system, and pushes the carriage to make a straight line reciprocating motion. The microcomputer will move according to the user's self-programmed knife route. In the reciprocating motion, the signal detected by the carriage limit is used as the basis to control and change its oil circuit movement, so as to achieve the expected knife route. When purchasing a pipe cutting machine, you should also understand its purpose: this machine tool is widely used in the handle industry and other stainless steel pipe cutting and chamfering automatic pipe opening purposes. It can place stainless steel pipes and seamless steel pipes with a diameter of ∮25 or less and a length of 6 meters. For automatic feeding, cutting, and chamfering processes, one person manages multiple machines, reducing labor intensity and saving personnel.
The automatic pipe cutting machine can automatically clamp materials, feed, feed, set size, stop at a fixed number, and work metering. The main circuit of the machine uses a PLC programmable logic controller. Automatic feeding, clamping, and cutting systems, accurate and fast feeding, can cut 10-50 times per minute. The counter can be set for the number of cutting times, and the machine will automatically stop after the cutting is completed. There is no need for manual operation at all, and the higher mechatronics allows one person to operate multiple machines, reducing the number of employees. The total counter can count the workload of one day. The total pressure, front, back, and pressure can be adjusted steplessly to ensure that the workpiece is not pinched or deformed. The servo pipe cutting machine is used, and the accuracy of the pipe cutting length is guaranteed to be within plus or minus 0.05mm (the error mainly occurs on the steel pipe and the tool), and the cut is shiny and has no burrs.